Ожидающие правки на iPod Mini Bottom Bezel Replacement
ZH
Примечание. Принятие или отклонение любого редактирования неявно применяется ко всем ранее ожидающим изменениям на том же этапе или введении.
|
|
0-black-Lift the metal retaining bracket out of the iPod. |
| + | [* black] 将金属支架从iPod中取出。 |
|---|
|
|
0-black-A small pair of snap ring pliers is the easiest tool to remove the metal retaining bracket. |
|
|
0-black-You can also use a flathead screwdriver to pry out the metal retaining bracket beneath the bottom bezel as shown. You can free the bracket by first pushing in the metal arms on the corners and then lifting the bracket. |
| + | [* black] 一副小卡环钳是最简单的工具来拆除金属固定支架。 |
|---|
| + | [* black] 您也可以使用一字螺丝刀撬出底部边框下方的金属固定支架，如图所示。您可以先将支架上的金属臂推入，然后再将支架提起来，以释放支架。 |
|---|
|
|
0-black-Carefully insert a small flathead screwdriver or [https://www.ifixit.com/Store/Tools/Jimmy/IF145-259?o=1|Jimmy] in the seam between the metal casing and white plastic bottom Use the screwdriver to pry up the white plastic bottom bezel. Be careful not to damage the soft plastic with your screwdriver. |
| + | [* black] 小心地在金属外壳和白色塑料底部之间的接缝处插入一个小一字螺丝刀或Jimmy，并用螺丝刀撬起白色塑料底部边框。小心不要用螺丝刀损坏软塑料。 |
|---|
|
вещь
|
Bottom Bezel |
|
заголовок
|
iPod Mini Bottom Bezel Replacement |
|
введение
|
The plastic part on the bottom of the iPod. |
|
заключение
|
To reassemble your device, follow these instructions in reverse order. |
|
Thing |
|
|
Title |
|
|
Introduction |
|
|
Conclusion |
| 要重新组装您的设备，请按照相反的顺序执行这些说明。 |
|