Перейти к основному содержанию
/
Мой рабочий стол для верстки руководств

Получите быстрый доступ к руководствам, запчастям и ответам касательно ваших устройств

​Вступительная история: iPhone 7 LCD and Digitizer Replacement

Отредактированно Evan Noronha -

Правка одобрена автор Evan Noronha

До
После
Без изменений
Устройство
iPhone 7
Type
replacement
Thing
Screen and Digitizer
Title
iPhone 7 Screen and Digitizer Replacement
Introduction
Follow the steps in this guide to replace a cracked or faulty screen in an iPhone 7. This guide includes removing the original display assembly, as well removing the home button, earpiece speaker, front camera assembly, and LCD shield plate from the original display. These parts should be transferred to your new screen before installing it.
If your replacement part already includes the earpiece speaker, front camera assembly, and LCD shield plate, you can follow this shorter guide which only has instructions for removing the home button.
Note that since the home button sensor is factory-paired to the iPhone's logic board, using any replacement part will result in losing Touch ID ''and'' Home Button functionality.
Time Required Min
Нет оценки
Time Required Max
Нет оценки
Difficulty
Moderate
Conclusion
To reassemble your device, follow these instructions in reverse order.
Author
Public
Нет

Требования для руководства

Инструменты

  • P2 Pentalobe Screwdriver iPhone - Archived x1 added.
  • iOpener x1 added.
  • Suction Handle x1 added.
  • Spudger x1 added.
  • iFixit Opening Picks (Set of 6) x1 added.
  • Tri-point Y000 Screwdriver x1 added.
  • Tweezers x1 added.
  • Phillips #00 Screwdriver x1 added.

Флаги

  • In Progress added.

Шаги

Шаг №: 1
До
После