If your iPad's screen is badly cracked, wear skin and eye protection. Cover the screen with a smooth layer of clear packing tape to contain glass shards and help the suction cup adhere. Alternatively, use a strong piece of tape (such as duct tape) and fold it into a handle.
Place a suction cup next to the iPad's home button and press down to create a seal.
To get the most leverage, place the suction cup as close to the edge as possible without going past the edge of the display.
If you want to use the Anti-Clamp, a tool we designed to make the opening procedure easier, follow this guide.
Firmly pull up on the suction cup to create a small gap between the front panel and the rear case.
Don't pull too hard, or you may shatter the glass. If necessary, apply more heat to further soften the adhesive.
Once you've opened a sufficient gap, insert an opening pick into the gap.

开缝

Bold
Italic
Underline
Ссылка
如果您的iPad屏幕严重破裂，请穿戴皮肤和眼睛保护装备。用一层光滑的透明胶带覆盖屏幕，以防止玻璃碎片并帮助吸盘附着。或者，使用强力胶带（如防水胶带），折一个手柄。
Bold
Italic
Underline
Ссылка
将吸盘放在iPad的主页按钮旁边，按下以创建密封。
Bold
Italic
Underline
Ссылка
为了获得最大的杠杆效应，将吸盘尽量靠近边缘，但不要超过显示屏的边缘。
Bold
Italic
Underline
Ссылка
如果您想使用反向钳，一个旨在使打开过程更容易的工具，请按照该指南操作。
Bold
Italic
Underline
Ссылка
牢固地拉起吸盘，以在前面板和后壳之间创建一个小缝隙。
Bold
Italic
Underline
Ссылка
不要拉得太用力，否则可能会破坏玻璃。如有必要，可以再次加热以进一步软化胶粘剂。
Bold
Italic
Underline
Ссылка
一旦打开了足够的缝隙，请将撬片插入缝隙中。

Ваш вклад лицензируется под свободной лицензией Creative Commons .

10.5寸iPad Pro开盖流程

Перевод шага 2

Редактор последовательности шагов руководства, сочетание клавиш: