Перейти к основному содержанию
/
Мой рабочий стол для верстки руководств

Получите быстрый доступ к руководствам, запчастям и ответам касательно ваших устройств

Xbox Series X サウスブリッジボード

Английский
Японский

Перевод шага 1

Шаг 1
Xbox Series X Southbridge Board Replacement, Disconnect the interconnect cable: шаг 0, изображение 1 из 3 Xbox Series X Southbridge Board Replacement, Disconnect the interconnect cable: шаг 0, изображение 2 из 3 Xbox Series X Southbridge Board Replacement, Disconnect the interconnect cable: шаг 0, изображение 3 из 3
Disconnect the interconnect cable
  • Depending on your model of Xbox, the interconnect cable locking tab may be in the middle of the socket. If so, skip to the next step.

  • Grip the base of the interconnect cable connector with your fingers.

  • Depress each side of the connector to unlock the cable locking tabs.

  • With the locking tabs depressed, grip the edges of the interconnect cable and pull it straight out of the connector to disconnect it.

  • With the locking tabs depressed correctly, the interconnect cable will slide out with very little force.

  • During reassembly, the interconnect cable should "snap" into place when fully inserted.

Xboxのモデルによっては、相互接続ケーブルのロックタブがソケットの 中央 にある場合があります。その場合は、次の手順に進んでください。

相互接続ケーブルコネクタの根元を指で握ります。

コネクタの両側を押して、ケーブルのロッキングタブのロッㇰを解除します。

ロッキングタブを押し下げた状態で、相互接続ケーブルの端をつかみ、コネクタからまっすぐ引き抜いてケーブルを外します。

ロッキングタブが正しく押し込まれていれば、相互接続ケーブルは ほとんど力を入れずにスライドしながら外れます。

再組み立ての際、相互接続ケーブルを完全に差し込むと「カチッ」と音がします。

Ваш вклад лицензируется под свободной лицензией Creative Commons .