Hey guy, the hard drive that has windows on it is keyed to the hardware from the other computer so it’s just going to trigger the activation cycle. And the drivers for subsystems that are installed are mated to the other computer and there’s probably some incompatibilities with the computer you put it in now so you’re gonna have lots of crashing lots of corruption and the only way to fix that is to backup your data wipe the drive and do a fresh install windows and unfortunately have to pay for a windows license.
Hey Guys! I have found that if you squirt just a touch of 100% isopropyl alcohol at the bottom corner of iPhone, Samsung, etc. and can work enough of it in, that adhesive will instantly dissolve and allow you to get an opening to slide a pick under to slice the adhesive all the way around. The key is not use too much that it goes onto the screen causing delamination if you are removing a screen you plan to reuse. On the Ultra 21, that back glass is INCREDIBLY fragile especially at the edges plus the very extreme contouring of that glass, thus using alcohol all the way around to dissolve and loosen adhesive is the way to go, and preventing a shattered back glass. (Learned the hard way on my 1st one....doh.)
Guys! I replaced my single lens laser drive deck. It reads discs and mounts but fails install and the system goes black with 3 beeps, green light stays on! Help!!