Этот профиль еще не завершен.
Вопросы
Hey guys, I have an iPad Mini here. I'm not entirely sure how to put on the adhesive to finally seal it all up. I know...
Читать далееHey guys, I've got an iPad mini here, and I'm not sure what's wrong with it. I had been trying to find the correct screw...
Читать далееHey guys! So I got my hands on an EMC 2560 iPad 2, and when I received it, the whole device was bent. I took out the...
Читать далееHello iFixit! I'm having a problem with an iPad mini. A friend asked me to replace her screen, there were complications,...
Читать далееHello! I recently purchased an iPad for repair purposes. Unbeknownst to me, it was an EMC 2560 model. I'm still waiting...
Читать далееI was working on an iPad mini, a simple digitizer replacement. In trying to remove remnants of glass (the screen was in...
Читать далееОтветы
I just finished sealing the iPad up- it's underneath a blanket with a ton of books on it (a ghetto clamp :D) Time will tell if it works or not...
Читать далееI would probably say the same thing; those LCD cables seem to want to fall off to no end. Not sure if you've ruled this out already, but it's good to cover all bases: It might be the auto-lock feature. If you can consistently replicate the problem though, with auto-lock off, I'd just remove the digitizer and reconnect the LCD cables.
Читать далееMake sure that ALL the connections and ports are screwed-in/connected securely. That should fix it.
Читать далееThe only feasible explanation is that the logic board is broken. You'll probably have to get a new one.
Читать далееYou may have a faulty LCD, if the iPad was not turned OFF (not sleep, but off) then it can damage the LCD backlight.
Читать далееRe-install the new cable, closely following the online instructions. Make sure all screws and connection ports are secure.
Читать далееThe only answer I can give is that you have a different model than the schematic you have.
Читать далееThey are double sided, make sure you're not leaving the adhesive on the sheet, and just keep trying to seperate it.
Читать далееHave you ever taken your iPad apart? If so, it may be a backlight issue with the LCD, in which case you need a new one. It also might be a setting, on Apple devices you can make the iPad set the brightness automatically- make sure that's turned off.
Читать далееThere are three main things that could have happened here: -Faulty Digitizer Sometimes a digitizer is just defective. -Incorrectly Folded Cable The cable connecting your digitizer to your logic board could be pinched. -Digitizer Connection Make sure the port where the digitizer connects to the logic board is secure, and that you've pushed down the tiny locking levers.
Читать далееСтраница 1 из 2
You Just
@miir
111
Репутация
17
Ответов
0
Руководства
Пользователь с 08/11/15
Голоса
3
0